There are six materials currently validated for use with your XiP printer. Which one you choose will depend on your particular 3D printing application.

PRO410 Resin

PRO 410 Resin is a rigid photoplastic that prints parts with extreme accuracy and an exceptional surface finish. Formulated based on Henkel’s LOCTITE® PRO410 polymer and optimized for Nexa3D’s printers.

	Quick design verification models Display models  Models where accuracy and resolution are critical	Technical Data Sheet Safety Data Sheet	XiP Layer height: 100um

 

xCE-Black Resin

CE is a cyanate ester-like material for high stiffness and temperature applications. It resembles the aesthetics of injection-molded nylons, polyesters, polyamides, and polyimides.

	Functional prototypes are subject to higher temperatures ("under-the-hood") Low volume injection molding inserts for lower temperature plastics  End use parts	Technical Data Sheet Safety Data Sheet	XiP Layer Height: 100um

 

xPP405-Black Resin

xPP405-Black is a tough, impact-resistant material with a modulus similar to molded, unfilled polypropylene. Exhibits excellent weathering characteristics and UV stability.

	Design verification models  Functional prototypes  End-use parts including packaging,  piping, and consumer and industrial  applications, including large housings  and enclosures	Technical Data Sheet Safety Data Sheet	XiP Layer height: 100um

 

xABS3843-Black Resin

xABS3843-Black is a tough and durable material with the aesthetics of injection molded black ABS. High performance, high modulus material boasting excellent flexural and tensile physical properties with a relatively high degree of elongation. It displays high green strength and good heat deflection temperature enabling it to print accurately and function in a wide variety of applications. It has been tested in QUV exterior weathering conditions (ASTM G-154) for 800 hours with less than a 15% change in Tensile and IZOD Impact properties.

	Design verification models Functional prototypes  Snap fits  Jigs and fixtures  Patterns  End-use parts	Technical Data Sheet Safety Data Sheet	XiP Layer Height: 100um

 

KeyModel Ultra Resin

KeyModel is a material meant for thermoforming and removal die and model application. Manufactured by Keystone. It is capable of easy thermoforming release with flawless detail that is carve-able without chipping.

	Dental thermoforming  application (100μm)  Dental removal die and  model application (50μm)	Technical Data Sheet Safety Data Sheet	XiP Layer Height: 100um, 50um

Updated June 07, 2022 20:48