Last updated 4 March 2024 (.nxp version 102)
Refer to latest .nxp for updates through Nexa X
Layer height profiles shown in micron.
For NXE printers, most materials should be run on Everlast membranes (black frame) except as noted with EL2 for Everlast 2 blue frame membranes.
NOTE: rows in gray are materials planned to be phased out from Nexa3D distribution channels but can be supplied by the resin manufacturer. Contact Nexa3D support for any questions.
| XiP (solid BP) | XiP Pro / NX Pro LE5 | NX (LE1-3, slotted BP) | NX Pro (LE4) | |
| General Purpose Resins | ||||
| xMODEL15-Gray | 100 | 100 solid | 100 | 100 solid |
| xMODEL15-White | 100 | 100 solid | 100 solid | |
| xMODEL15-Black | 50, 100 | 100 solid | 100 | 100 solid |
| xMODEL17-Clear | 100, 200 | 100 solid | 100, 200 solid | |
| xMODEL35-Gray | 100 | 100 | 100 slotted (EL2) | |
| xMODEL35-Black | 100 | 100 | 100 slotted (EL2) | |
| PRO9499-White | 100 | 100 solid | ||
| xPRO410 | 50, 100 | 100 solid | 100 | 100 slotted |
| x45-Black | 100, 200 | 100, 200 slotted | ||
| x45-Clear | 200 | 100, 200 | 200 solid | |
| x45-Natural | 200 | 100, 200 | 200 solid | |
| xCE-Black | 100 | 100 solid | 100 | 100 slotted |
| xCE-White | 100 | 100 slotted | ||
| xGPP-Translucent | 100 | 100 slotted | ||
| xGPP-Gray | 100 | 100 slotted | ||
| Engineering Resins | ||||
| xABS3843 | 50, 100 | 100 solid / slotted | 100 | 100 slotted |
| xPP405-Black | 100 | 100 slotted | 100 | 100 slotted |
| xPP405-Clear | 100 | 100 slotted | ||
| xPEEK147 | 50, 100 | 100 slotted | 100 | 100 slotted |
| xCERAMIC3280 | 100, 200 | 100, 200 solid / slotted | 100, 200 slotted | |
| xPRO9400-FR | 100 | 100 solid | ||
| xPRO1100-Black | 100 | 100 solid | ||
| xESD | 100 | 100 slotted | 100 slotted | |
| Elastomeric Resins | ||||
| xFLEX475-White | 100 | 100 solid | 100 | 100 solid (EL2) |
| xFLEX475-Black | 100 | 100 solid | 100 | 100 solid (EL2) |
| xFLEX402 | 100 | 100 slotted | 100 slotted (EL2) | |
| Molding Resins | ||||
| xMOLD | 100 | 100 solid | ||
| Addifab GP2-LCD1 | 100 | 100 | 100 solid | |
| Dental Resins | ||||
| xDENT201-Gray | 50, 100 | 50, 100 solid | 100 slotted | |
| xDENT341-Beige | 50 | 50 solid | ||
| Saremco Crowntec A2, B1 | 50 | |||
| Rotin Denture Base 2.0 | 50, 100 | |||
| Rodin Splint 2.0, Rigid | 50, 100 | |||
| Rodin Surgical Guide 2.0 | 50 | |||
| KeyModel Ultra Ivory | 50, 100 | 100 solid | 50*, 100* | 50, 100 solid |
| KeyModel Ultra Gray | 50, 100 | |||
| xMODEL 2505 | 50, 100 | 50, 100 solid | ||
| KeySplint Soft | 100 | 100 | 100 slotted | |
| KeySplint Hard | 100 | 100 | 100 solid | |
| KeyGuide | 100 | 100 | 100 solid | |
| KeyTray | 100 | 100 slotted | ||
| KeyOrtho IBT | 100 | 100 solid | ||
| Merz Dental Cast purple | 100 | |||
| Merz Dental Model sand | 50, 100 | |||
| Merz Dental Model taupe-gray | 50, 100 | |||
| Merz Dental Model ash-gray | 50, 100 | |||
| Merz Dental Tray aqua | 150 | |||
| Merz Dental Tray hot-pink | 150 | |||
*NXE400 with LE3 can print using the NXD200 LE3 profile, but with height limitations. Settings are optimized for dental models and may not work reliably on other geometries.
Updated
Comments
0 comments
Please sign in to leave a comment.