Filling the XiP Pro Resin Vat

Fill up to 1.5L mark denoted on the back wall of the resin vat by manually pouring resin using a 5kg jug. Shake the resin for 30 seconds or more to mix.

Load a cartridge of resin to maintain the resin level during the print.

Remove the seal cap of the resin cartridge by unscrewing the top.
Insert the resin cartridge while holding it with the label facing toward the front. Make sure it is fully inserted.



Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request



Article is closed for comments.