Starting a Print on the XiP Pro

Starting a Print from the Touchscreen

On the Print menu, tap the option you want and then select a file to print.

Queue

Files waiting in the NexaX job queue

History

Files printed in the past.

USB

Files loaded on a USB key plugged into the USB port.
  • Confirm that the Resin Vat and Resin Cartridge match the .nxa file’s resin type (you may need to re-generate supports for different types of material).
  • Tap “Print Now”.
    As the print progresses, the UI displays the progress by layer.
    You can walk away at this moment and leave the print unattended.
  • After the print job is complete, a message requests whether the print was successful or not.
  • If the print was successful, tap “Yes”. If the print failed, tap “No” and the printer will request whether you want to Clean the Resin Vat After a Failed Print.

 

Updated

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.